Bob and all,
That is good advice, but what is missing is the fact that the "ALC"
meter on the K3/K3S/KX3/KX2 indicates the onset of ALC at the 5th bar,
so the 4 bars solid and the 5th bar flickering is the "NO ALC" point for
those transceivers. The first 4 bars are there to assist you in
adjusting the audio level. I don't know how many times we have to
repeat that, but follow the instructions in the manual.
If you need a more complete explanation, go to my website www.w3fpr.com
and scroll the left column down to the bottom article - click on the
link to get the full information.
73,
Don W3FPR
On 6/29/2018 8:24 PM, Bob McGraw K4TAX wrote:
If it power hunts, this is a clear indication that the audio level is
not correct. Be sure to set the level such that you have 4 bars solid
on the ALC meter and the 5th bar flickering. Now, with that said, this
is not ALC, but is audio level. For others to advise you and even the
instructions in the software manuals, unless they have set up and
operated an Elecraft radio, the topic of adjusting for no ALC is
incorrect and thus DOES NOT apply to Elecraft radios.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
