The delay DE command only effects K3 so you can remove several. Check syntax of #CTF Dave K5MWR
On July 2, 2018 6:41:05 PM MDT, Byron Peebles <[email protected]> wrote: >I am having trouble with the following Macro on a K3S and P3/SVGA. > >BN10;DE500;MD6;DE100;FA00050313000;DE100;#CTF+00050315000;DE100;#SPN000043;DE100; > >The delays are just there to slow things down, right? No impact >otherwise. > >What happens is the Macro executes, but when it completes, the P3/SVGA >switches the Center Frequency back to the previous band and the band >the >radio is on is correct but the SVGA display differs from the P3 itself >by quite a bit. For specifics, I test the Macro by switching to 28MHz >band. After execution, the P3 shows the 28MHz center frequency but the > >SVGA shows 74Mhz, or thereabouts. - If I change the SPN, the center >frequency varies. Suspicious. > >What I am trying to accomplish is this: > >Change bands(6m), Set Mode(Data), Set VFO-A Frequency (50313), Set P3 >Center (50315) and P3 Span (4.3) > >The idea is to have the audio bandwidth of FT-8 on the SVGA display (in > >this example). > >What obvious mistake am I missing and forgetting? Thank you. > >73, Byron > >Note the results are the same whether in a Macro button or some the >test >command line. The results are fine when the command is broken up. I do > >know about delays in command execution, especially band changes, and it > >does work better when you are already on the band. > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to [email protected] -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
