1) Configure your Windows Default Sound card to be but "new" card (the one *not* your K3). 2) In WSJT-X set the audio to use USB Audio CODEC for both input and output 3) In WSJT-X -> Settings -> Sound Card, set the sound card to "[0] Windows Default Sound Card" *NEVER* allow Windows to use "USB Audio CODEC" (the K3s sound card) as the Default Device or Default Communications Device as this can result in Windows' "noises," streaming audio, VoIP audio, etc. being routed to the K3S (or K3 with KIO3B) and, if VOX is enabled, "on air" without the operator' knowledge. 73, ... Joe, W4TV On 2018-07-07 10:03 AM, MaverickNH wrote:
I have WSJT-X 1.9.1 running fine with my K3S and Win10 on my PC. I'd like to enable JTAlerts audio alerts using a TaoTronics TT-BA01 BT transmitter plugged into my PC headphone jack but it seems any soundcard choice from JTAlerts stops TX from my RIG. When I plug in the BT TXr I see a new soundcard choice HEADPHONES (High Definition Audio), which is separate from the one used in WSJT-X (SPEAKERS (USB Audio CODEC). How do I get JTAlerts audio working without messing up WSJT-X TX? Bret/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
