Andy,
No TXD is TXD all the way through the path. Yes, the DTE TXD will have
the drivers, and the DCE will have receivers, but it is TXD from end to
end. RXD is the other way around because the DCE drives that line.
Trsnsmit and receive are named with respect to the DTE.
73,
Don W3FPR
On 7/8/2018 8:39 PM, ANDY DURBIN wrote:
"TXD is really pin 3."
One end's TXD is the other end's RXD. That's obvious to those who have used
RS-233 for a while but if someone needs to ask then it may not be obvious. Find
the TXD pin on the source and connect it the RXD pin on the destination.
Sometimes it's easier to look with a scope than to try to understand the
documentation.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
