Possible to swap covers? Chuck Hawley [email protected]
Amateur Radio, KE9UW aka Jack, BMW Motorcycles ________________________________________ From: [email protected] [[email protected]] on behalf of Jack Brindle via Elecraft [[email protected]] Sent: Sunday, July 08, 2018 10:49 PM To: Jeff Blaine Cc: [email protected] Subject: Re: [Elecraft] KPA500 installation on side? I know that there are feet are on the right side of the case, but if I were to place the KPA500 on its side, i think I would create a stand so that it can sit on the left side. Why? The big weight (power toroid) is on the left side, while the heat generators (the PA transistors) are on the right. The center of gravity would be lower, cables would be down low (especially the power cable), and the fans up high. The only heat generators on the left side are the power regulators (for +5 and +12V). They don’t generate nearly as much heat as the PA. The down side? The carry handle is on the left. That’s why a short cradle would be needed to lift the case above the handle extension. Just opinion, not an official recommendation. Mine sits nicely on its bottom feet with the KAT500 on top. That allows me to cable the two very nicely using custom cables. 73, Jack, W6FB > On Jul 8, 2018, at 8:25 PM, Jeff Blaine <[email protected]> wrote: > > To clarify - by "side" i mean the side that you would call the left or right > side of the case - that is what i'm considering to have down. Not the face > or back. Just rotating the amp 90 deg. > > 73/jeff/ac0c > alpha-charlie-zero-charlie > www.ac0c.com > > On 08-Jul-18 6:22 PM, Dauer, Edward wrote: >> Oops. My error. I read KPA1500, not 500. Wishful thinking on my part. >> >> Move to strike prior testimony. >> >> Ted , KN1CBR >> >> >> >> On 7/8/18, 5:16 PM, "Dauer, Edward" <[email protected]> wrote: >> >> Just last week I sent the same question to Elecraft Support. The >> answer I got was yes, it can be, with two caveats. First, be sure to leave >> the 4 inches of free air clearance next to the top (top as in standard >> orientation), and don't set it so that the LEDs are on the floor. The >> orientation isn't odd, really. If it is resting on its right side the power >> switch will be on the rear, but very near the top edge. That's how mine >> will be, when it arrives this week --- I hope.. >> Ted, KN1CBR >> ------------------------------ >> Message: 9 >> Date: Sun, 8 Jul 2018 10:56:03 -0700 >> From: Mark Goldberg <[email protected]> >> To: Elecraft Mailing List <[email protected]> >> Subject: [Elecraft] KPA500 installation on side? >> Message-ID: >> >> <CAKn+a3tL_r6RnRod1BSk-ET=_+R1i=srgjcl-61e7bw8rva...@mail.gmail.com> >> Content-Type: text/plain; charset="UTF-8" >> Can the KPA500 be installed on it's side? There are feet >> there. I want to >> install it in an RV and there is more room for wiring and fan air >> movement >> that way. >> A search did not turn up any answers. >> 73, >> Mark >> W7MLG >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
