Actually, 20 amp breakers will work fine.
Use #12 wire and it will handle 20 amps. If the run is long, use #10
wire to reduce the voltage drop.
Elecraft recommends plugging into 195 to 250 VAC 50/60 Hz up to 20A.
73,
Don W3FPR
I probably missed this but my google searches aren't working either.
Will 2x 20A breakers (220v) be sufficient for the KPA1500?
Thanks.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
