I concur, I used Romex which had 2 conductors plus a ground. Perhaps he meant that the ground wire should be the same size as the two conductors but I am not sure how much control you have over this using standard cable. While adding this circuit I also ran a dedicated 120v outlet for the radio and rotators.
John KK9A N2TK, Tony wrote: I do not understand the need for three wires plus ground. For a clothes dryer outlet a neutral is required to get 110VAC from one of the phases to the neutral. But for amps you only need both phases and a ground. The plugs are three wire, not four. 73, N2TK, Tony On 7/9/2018 12:26 PM, Bob McGraw K4TAX wrote: > I would also suggest using three - #10 with ground as the line from > the breakers to the amp operating position. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
