Hi Andy,
I've owned a KPA500 since soon after it's introduction, and am currently
using a KP1500 borrowed from a neighbor who is in Germany for WRTC.
I've never used the ACC cable between K3 and either amp -- the operation
of frequency-sensing circuitry requires no more than a tap on the mic or
a dit to switch bands. The auto-tuner built into the KPA1500 is
spectacularly good, remembering multiple tunings per band per antenna
output. The KAT500 tuner is also quite good at detecting frequency.
73, Jim K9YC
The reason to buy a K3 or K3S is because they are superior radios, but I
wouldn't factor integration with
On 7/15/2018 7:05 PM, ANDY DURBIN wrote:
I'd like to understand all the operational advantages of integrating
a K3 with a KPA500 and KAT500 that are not available to those who
chose to use a TS-590 instead of a K3.
I know about:
1. KPA500 and KAT500 know TX frequency and configure band,
antenna, and tuning solution before transmitting
2. Adjustment of power output is based on band and KPA500
OP/STBY mode
3. Selection of band on KPA500 is passed to K3 and KAT500.
I have developed an Arduino based interface that implements 1. 2
seems to be doable and useful. 3 seems doable but not very useful.
What else is there?
Thanks and 73,
Andy k3wyc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
This message has been scanned by E.F.A. Project and is believed to be
clean.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
