I am also a bit confused (not the first time), but I could have SWORN that the initial query was from someone who wanted a SHORTER cable.
Dave - K9FN On Wed, Aug 1, 2018 at 3:45 PM [email protected] <[email protected]> wrote: > Elecraft was my first experience with power pole connectors and I have > purchased custom cables from Powerwerx. They did a nice job, eventually I > purchased a crimper and connectors and made cables myself. If you are > making the KPA1500 cable longer than the factory cable it is probably > desirable to use a larger diameter. The factor may not be able to > accommodate this since the 75 amp connector is made for 6 awg max. > > John KK9A > > > Richard Thorne rthorne at rthorne.net > Wed Aug 1 14:15:28 EDT 2018 > > Mike, > > I went directly to Elecraft with my question. The answer is 6g. > > I was told to be sure to use the correct crimp tool for the job. If I > make the cable I'll probably just have Powerwerx handle it as they have > the correct hydraulic tool for the job. > > Rich - N5ZC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
