If one is going to remote the KPA1500, wouldn't it make a lot more sense
to extend the 240 V AC line? Or just install a 240 V outlet at the
amplifier location.
73,
Scott K9MA
On 8/1/2018 16:17, j...@kk9a.com wrote:
That is why I said "IF" you are making a longer cable...
John KK9A
David Bunte K9FN wrote:
I am also a bit confused (not the first time), but I could have SWORN that
the initial query was from someone who wanted a SHORTER cable.
Dave - K9FN
On Wed, Aug 1, 2018 at 3:45 PM john at kk9a.com <john at kk9a.com> wrote:
Elecraft was my first experience with power pole connectors and I have
purchased custom cables from Powerwerx. They did a nice job, eventually I
purchased a crimper and connectors and made cables myself. If you are
making the KPA1500 cable longer than the factory cable it is probably
desirable to use a larger diameter. The factor may not be able to
accommodate this since the 75 amp connector is made for 6 awg max.
John KK9A
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@sdellington.us
--
Scott K9MA
k...@sdellington.us
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com