This works but it is far easier. If you are using the built-in Meyer in the K3, just go to CONFIG/PTT-KEY and set to “off-DTR”.
Now go the n1mm config and set your radio comm port and check “cw” and then tap “Set”. Setup the port info and under DTR set to CW. Close the configurer window and the CONFIG menu on radio. Turn ON VOX and give it a try. Sent from my iPhone ...nr4c. bill > On Aug 1, 2018, at 8:05 PM, Don Wilhelm <[email protected]> wrote: > > Ted, > > That is something in N1MM which effectively tell the N1MM software to send > the ASCII string which follows through the CAT port. > > You may find more information in the N1MM help file or forums. > > 73, > Don W3FPR > >> On 8/1/2018 7:32 PM, Dauer, Edward wrote: >> The following may test our commitment to the idea that there is no such >> thing as a stupid question . . . . >> I finally got around to setting up my N1MM logger to key my transmitters >> without having to use a K1EL or any other keyer -- just the KUSB cable >> directly from the PC into the rig. >> After hours of frustrating failure, by lucky accident I came across a post >> on the Internet that gave examples for programming the Fn keys, using N1MM >> to key a KX3. Each command line contains the string CATA1ASC before the >> command KY. Without the CATA1ASC, hitting the Fn key does nothing. With >> it, and with the standard KY programming command, it works -- on the KX3 at >> least. My K3 is at my other QTH so I haven't tried this on that rig yet, >> but here's my question -- what is the CATA1ASC for? I did a word search in >> both the KX3 and the N1MM manuals, and in the KX3 Programmer's Guide, and I >> could find no mention of the CATA1ASC string. Had I not found the examples >> on the Internet accidentally I would still be trying to make this work with >> no success. >> So can someone help me understand what it's about and why I didn't see it in >> any of the manuals? Is it something in Windows 10? > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
