I am building a newly acquired K2. Everything was fine through stage 1 assembly and checkout. Upon reassembling after stage two the main tuning encoder no longer works (turning the knob does absolutely nothing). I contacted Elecraft support and Gary sent me a new encoder assembly. I received it yesterday, assembled it and installed it, it also does not work. At every stage I flush cut the leads on both the encoder PCB and the control board and insulated with thick paper.
To add to the plot, I have an older K2 which I disassembled and removed the encoder assembly from. I installed that encoder assembly in the new K2 and it works FB. I also installed one of the new encoder assemblies in the old K2 and it does not work (as expected). Being in contact with Elecraft support I expect this will get resolved soon, but I wondered if anyone on the list has any experience and/or suggestions. Thanks, Lou W2ROW -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
