I recently purchased subject mic and will be connecting it to the K3S shortly. Before I do that, I was wondering what mic settings to use? I currently have a Heil PR-10 mic and am using the MIC FP HI menu setting and a mic gain of 20; the PR-10 works fine, but I wanted to get a mic that I could switch back and forth from the wide HC-5X cartridge to the narrow or DX HC-4X cartridge, thus the HM-10 XD. I have purchased the XLR 4 pin CC-1, connecting cable to replace the XLR 3 pin cable that I use with the PR-10 for connection to the FP Mic connector. The PR-10 has a 600 ohm balance impedance while the HM-10 XD has a 600 ohm impedance, unbalanced, I guess. To begin I intend to use the MIC FP HI menu setting. Does anyone see a problem with that or is there anyone using a HM-10 XD that can offer some suggested settings. Any response or info will be appreciated.
Best 73, Tom/W1QU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
