Does Heil have the settings on their website? I seem to recall they do. That is a good place to start.
Bob, K4TAX Sent from my iPhone > On Aug 14, 2018, at 1:58 PM, Thomas Donohue <tomdo...@gmail.com> wrote: > > I recently purchased subject mic and will be connecting it to the K3S > shortly. Before I do that, I was wondering what mic settings to use? I > currently have a Heil PR-10 mic and am using the MIC FP HI menu setting and a > mic gain of 20; the PR-10 works fine, but I wanted to get a mic that I could > switch back and forth from the wide HC-5X cartridge to the narrow or DX HC-4X > cartridge, thus the HM-10 XD. I have purchased the XLR 4 pin CC-1, connecting > cable to replace the XLR 3 pin cable that I use with the PR-10 for connection > to the FP Mic connector. The PR-10 has a 600 ohm balance impedance while the > HM-10 XD has a 600 ohm impedance, unbalanced, I guess. To begin I intend to > use the MIC FP HI menu setting. Does anyone see a problem with that or is > there anyone using a HM-10 XD that can offer some suggested settings. Any > response or info will be appreciated. > > Best 73, > Tom/W1QU > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rmcg...@blomand.net > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com