Peter,
If you mount the KPA1500 power supply vertically, put it on the front
panel and there will be no interference with the air flow.
Note that the LEDs stick out a bit from the front panel, so put the
large part of the front panel on something that will be as thick or
thicker than the amount the LEDs project - like a piece of wood or plastic.
73,
Don W3FPR
On 8/20/2018 12:09 AM, Peter Dougherty wrote:
Hi All,
My KPA-1500 arrived over the weekend and I've not gotten a chance yet to set it
up. In looking at both the amp and the power supply I noticed both have carrying
handles and rubber feet. Are these rubber feet just there for transporting the
untis, or can the power supply actually be run vertically with equal efficiency
and cooling as it would be horizontally? If so, that would fit my operating desk
perfectly.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
