Yes, that will work Richard. I connect the K3s to my Mac mini via the Elecraft supplied USB to USB cable. It does not go to the RS232 on the K3s. If you already have the K3s and the MAC connected via the USB cable then you just need to select the correct port on the WSJT-X configuration. If you are already using the connection for a logging program, like MacloggerDx or RUMP the only one program at a time can use the connection.
Also, look into JT-Bridge to connective logging program to WSJT-X and let WSJT-X control the radio. Michael Blake > On Aug 23, 2018, at 6:01 PM, Richard <[email protected]> wrote: > > K3S, Mac Sierra 10.12, WSJT-X version 1.8.0. > > Everything is working perfectly. Well, 99.874% is working perfectly. The > little WSJT-X dropdown menu for band selection doesn’t follow band changes I > make at the K3S. I am told this can be facilitated with “a cable” between the > K3S and the Mac: RS-232 connector at the K3S and USB-A at the Mac.? > > Is this correct? If not, what DO I need? > > Do I need to make any Menu or Config changes to activate this? > > I’d like to make this work so I won’t have a ton of incorrect band notations > in the log. > > Cheers! > > Richard — W4KBX > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
