Richard,
If you want to have the software application know the band and frequency
that the K3S is working, you must establish communications between that
application and the K3S.
With the K3S, that is accomplished over the USB connection between the
computer and the K3S.
So you must tell the application which COM port the K3S is connected to.
Yes, a USB port will have a COM port associated with it. I do not know
how to find that information on a Mac, so perhaps some other Mac user
will be able to tell you.
The K3S uses the USB cable, and not an RS-232 cable - unless you have
some strange connection using the RJ45 to RS-232 dongle on the K3S
instead of the USB cable.
73,
Don W3FPR
On 8/23/2018 6:01 PM, Richard wrote:
K3S, Mac Sierra 10.12, WSJT-X version 1.8.0.
Everything is working perfectly. Well, 99.874% is working perfectly. The little
WSJT-X dropdown menu for band selection doesn’t follow band changes I make at
the K3S. I am told this can be facilitated with “a cable” between the K3S and
the Mac: RS-232 connector at the K3S and USB-A at the Mac.?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
