Hey Rick,

The TERM message should always be transitory.  If it is not, you have an
RS-232 control problem (like the null-modem issue).  Check all your
cables.  In 100% of the times I've seen this issue, it's a loose connector
or a mismatched cable

73

Gerry Hull, W1VE  Hancock, NH USA
Trustee, VY1AAA YT Remote





On Thu, Aug 30, 2018 at 1:50 PM Rick Tavan <[email protected]> wrote:

> I seem to be suffering a recurrence of a very old problem (years ago) for
> which I don't recall the solution:
>
> I have a real K3 at the control site, controlling a K3 at the remote site
> via RRC-1258 MkII boxes. I have a mechanical D-SUB 9 pin switch to route
> the control site K3 serial port to either a local computer or the RRC. When
> routed to the RRC and operating normally, when I turn on the K3 it begins
> to show its power-on banner in the VFO B area, then mid-way through that
> scroll detects that it's in TERM mode with an RRC connected, powers up the
> remote K3, and all is well. However, that doesn't seem to be working now.
> The control K3 comes up and fails to detect the RRC. The power-on banner
> for the control K3 completes its scroll and the radio operates locally. I
> think it is slipping out of TERM mode. I can force it back into TERM mode
> with a long hold of the CONFIG button, but then it never turns on the
> remote radio. If I turn off the control K3 and then back on, it apparently
> has forgotten it was in TERM mode.
>
> Any advice?
>
> Thanks,
>
> /Rick N6XI
> --
>
> Rick Tavan
> Truckee, CA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to