Thanks Don! I Have the FTDrivers as well but had not restarted the Mac. After that everything works fine!
73, Christer > On 14 Sep 2018, at 17:19, Don Wilhelm <donw...@embarqmail.com> wrote: > > Christer, > > I don't know about the D2XX drivers. You need to have the FTDI drivers. You > can download them from https://www.ftdichip.com/FTDrivers.htm. > > The first step is to get your computer to enumerate the COM port associated > with the USB to serial adapter. Having that number, put it into the KX3 > Utility PORT tab and Test Communications. > > Once the utility connects, everything else should go smoothly. > > A rhetorical question - Why have I seen this problem recently from Mac users? > Perhaps the Mac software is no longer using the proper drivers for the FTDI > adapter. > > 73, > Don W3FPR > > On 9/14/2018 10:40 AM, Christer Palm via Elecraft wrote: >> Hi! >> I have big problems getting Elecraft KX3 Utility work on Mac OS X High >> Sierra. The application opens but will not connect to the KX3 >> Any Ideas? Yes I have the D2XX drivers and gone through the installation >> guides several times, as well as numerous restarts in between. > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
