Yes. You can disable DHCP in the amplifier and assign a static address.
Your router must be capable (within its address range) of accepting that
static address without a conflict from another device.
In the KPA1500 configuration utility v1.18.7.9:
Select menu >Configuration >Edit Configuration >Network tab
On the network tab, disable (uncheck) DHCP
Manually enter the address you want the amplifier to use
Press <Apply >OK.
-larry (K8UT)
------ Original Message ------
From: "Burl Borcherding" <[email protected]>
To: [email protected]
Sent: 2018-09-19 08:46:08
Subject: [Elecraft] KPA1500 - Static IPv4 address
Is it possible to set a static IP address on this amp? I am thinking
using one of my static IPv4 address and port 1500. This would
eliminate the local /server computer.
Or is there a better method of using remote K3, KPA1500 and RemoteRig?
I want to be able to use the KPA1500 app to monitor the amp.
Burl, AJ9Q
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
