Mine works exactly as Eric says it should. I have not uploaded any new
F/W, still using the original issue. Anything change for the PS in a newer
version? Just a thought . . . .
Ted, KN1CBR
------------------------------
Message: 13
Date: Wed, 3 Oct 2018 14:43:58 -0700
From: "Eric Swartz - WA6HHQ, Elecraft" <[email protected]>
To: Rick Stealey <[email protected]>, "[email protected]"
<[email protected]>
Subject: Re: [Elecraft] KPA1500 power aupply fan
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8; format=flowed
Rick and everyone - There should be NO fans running in the power supply
after
turning off the RF deck from its front panel.
Are you sure the RF deck front panel is OFF? (No lights on the RF deck FP)
The PS fan runs from the same supply that supplies the 50 V to the amp.
That
supply is definitely turned off when the RF deck front panel is off, which
also
kills the PS fans. The fans have absolutely nothing to do with the 12 VDC
supply
going to the RF deck.
In any case, no not modify how voltage is supplied to the RF deck, as this
will
not fix anything and will definitely void the Warranty.
If you are not able to resolve this issue contact our team at
[email protected] or via the phone and we'll help you figure out what is
happening.
My only thought is that there could be a short in the control cable between
the
amp RF deck and PS that is keeping the 50V supply and fans on in the PS.
(Or on
one of the connectors in the RF deck or PS.) Our support team will help you
debug whatever is happening if its a hw issue..
73,
Eric
/elecraft.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
