Never mind. I must have been looking at an old manual. The KX3 MENU:TX DLY setting is clearly documented on Page 41 of the KX3 Owner's Manual Rev. C5 <ftp://ftp.elecraft.com/KX3/Manuals%20Downloads/E740163%20KX3%20Owner's%20man%20Rev%20C5.pdf> .
73, Bob, N6TV On Wed, Oct 17, 2018 at 2:26 AM Bob Wilson, N6TV <[email protected]> wrote: > What is the fixed delay between KEY OUT going low and RF coming out of a > KX3? The K3 has a CONFIG:TX DLY setting, but I find no equivalent in the > KX3 manuals. The concern would be RF hot switching if the external > amplifier relay is too slow. > > From the KX3 manual: > > "The keyline output goes low during transmit, and can be used for > transmit/receive switching of linear amplifiers and transverters." The TX > Delay does not appear to be documented. > > (KEY OUT on a KX3 is the RING contact of the 2.5 mm stereo connector > labeled ACC2). > > 73, > Bob, N6TV > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
