Hi all, Now that I have my K3s out of the desk for repairs, one of the things I'd planned to do is to retire my MicroHam Microkeyer-II.
Since the K3s has its own built-in sound card it connects via USB I don't see the need for the MK-II any longer, and frankly I'd like to reduce the complexity and clutter behind the radio in a very tight space. I am using both the K3s and a P3 (with TX monitor), so I'm unsure of the needed cabling. I also have a Y-box installed at the moment, for my band decoder to the antenna switch and to my KPA-1500. I set this all up in July, 2015 and quite honestly, I've forgotten all the steps I needed to get the rig working with the MK-II, so I'd appreciate any details of how to get everything working without it. I know I'm going to lose two things: The Winkeyer, and true FSK RTTY. I've operated away from home just using the K3s's internal keyer and never had a problem (I'm still a relative slowpoke, rarely over 32WPM in contests and lower other times). RTTY will be a challenge for me, though. I haven't used AFSK for 17 years so would greatly appreciate help in making that work, especially with dual VFOs. Thanks in advance! ---------------------------------------------------- Regards, Peter Dougherty, W2IRT DXCC Card Checker/CQ-WAZ Checkpoint www.facebook.com/W2IRT K3s S/N 10023 KPA-1500 S/N 0398 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
