If it will tune to the IF frequency of about 8.2 MHz. From experience,
without an up conversion added, they won't tune that low.
73
Bob, K4TAX
On 11/8/2018 9:57 AM, WW3S wrote:
Can you use one of the less expensive sdr dongles in a similar way?
Sent from my iPad
On Nov 8, 2018, at 10:19 AM, John Simmons <[email protected]> wrote:
Isaac,
I did exactly that, using the HDSDR software. I used the RX ANT output (must
activate it from the front panel of the K3) to feed the antenna of the RSP1.
You use a BNC tee to feed the antenna back into the K3. Purists use an RF
splitter instead of a tee. I have a YouTube video that shows the results:
https://www.youtube.com/watch?v=KusmkeLdfwE
If you need further help, let me know.
73,
-John NI0K
TL_Netvision wrote on 11/8/2018 8:22 AM:
Hello all,
I am considering using an RSP1 SDR with my K3. I will probably use HDSDR
software to start with.
Can someone point me in the right direction for the whole procedure?
TIA
Isaac, 4Z1TL
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
