Thanks for the idea. Works great and got me away from the problems using
the IF out.
73 Doug N3QW
On 11/8/2018 10:53 AM, Bob McGraw K4TAX wrote:
I used HDSDR software and a BNC T and a couple of short coax jumpers
from the RX ANT output back into the RX input. Activate the feature
from the front panel of the K3S. The input impedance of the RSP-1
SDR is well above 50 ohms and thus I didn't observe any loading or
loss of the received signal.
As to software, HDSDR was my favorite and easy to setup and use. I
added OmniRig to allow for full interface to the K3S. This provides
two way communications between the radio and computer. Thus any change
on the radio is effected the same on the computer and any change on
the computer is resolved on the radio. Of course there is capability
in the HDSDR software to have your choice of the radio following the
computer or the computer following the radio or neither, thus both
being independent.
An excellent and economical approach which I used several years and
with different radios as well. That is......until I purchased a P3
to go with my K3S.
73
Bob, K4TAX
On 11/8/2018 9:19 AM, John Simmons wrote:
Isaac,
I did exactly that, using the HDSDR software. I used the RX ANT
output (must activate it from the front panel of the K3) to feed the
antenna of the RSP1. You use a BNC tee to feed the antenna back into
the K3. Purists use an RF splitter instead of a tee. I have a YouTube
video that shows the results:
https://www.youtube.com/watch?v=KusmkeLdfwE
If you need further help, let me know.
73,
-John NI0K
TL_Netvision wrote on 11/8/2018 8:22 AM:
Hello all,
I am considering using an RSP1 SDR with my K3. I will probably use
HDSDR
software to start with.
Can someone point me in the right direction for the whole procedure?
TIA
Isaac, 4Z1TL
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
