The firmware release notes seem to support what you are seeing: Changed temperatures for fan speeds: - On 160 thru 10 meters, fans increase speed at 50, 70, 80, 87, and 95 degrees, and slow at 40, 55, 75, 81, and 88 degrees. - On 6 meters the fans increase speed at 40, 50, 65, 80, and 90 degrees and slow at 35, 41, 51, 66, and 81 degrees. - New serial command ^FP0; can be entered in the KPA1500 Utility command tester to revert to previous fan profile, which sped up at 60, 70, 78, 85, and 90 degrees and slowed at 57, 67, 75, 82, and 87 degrees. ^FP1; selects the "new" fan speed profile, ^FP0 selects the "old" fan speed profile.
John, KC7DRI ________________________________ From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on behalf of Don Minkoff <cowc...@ca.rr.com> Sent: Friday, November 9, 2018 4:56 PM To: elecraft@mailman.qth.net Subject: [Elecraft] KPA1500 new software 1.87 I just went from my 1.62 rev to 1.87 and something changed. My fan use to come on at 60 deg and now comes on at 50 and off at 40. I need to go back and try and reload the older version. I don't think this is correct. Anyone else run across this? -- Don Minkoff NK6A ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hid...@hotmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
