Hello,
As the subject-line states, my records show that all was good this past May when I checked if I was up-to-date firmware-wise. Also, in September, for the power-up sequence, I successfully used the Utility to put in a banner with my call-sign. The idea today was to get DX-Lab and its WinWarbler connected to the KX3. I had read that the KX3's CW-decoding could be displayed in WinWarbler. But now, I have an issue and I'm not even out of the starting-gate. The Utility's tab "Firmware" shows that wheels are spinning in "Attempting to connect KX3 on port COM3 at ...." using various bit/s speeds. The KX3 is set at 4800 bits/s. So, I used Win10's trouble-shooting and got this message: The error I get is "Prolific USB-to-Serial Comm Port (COM8) has a driver problem." I'm mystified that I see COM3 in one place and COM8 in another. I have no idea what to do next. I was horrified to read that I had a Prolific USB adapter; so much bad press about Prolific. TIA for any help. 73 Jerry KM3K ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
