Why 4800 baud? I think it works better at 34.8.
And the KXUSB that I got with my KX3 was a FTDI based unit. Unplug all USB devices except the one for the radio. See what Device Manager has to say. Sent from my iPhone ...nr4c. bill > On Nov 27, 2018, at 11:58 PM, JEROME SODUS <[email protected]> wrote: > > Hello, > > > As the subject-line states, my records show that all was good this past May > when I checked if I was up-to-date firmware-wise. > > Also, in September, for the power-up sequence, I successfully used the > Utility to put in a banner with my call-sign. > > > The idea today was to get DX-Lab and its WinWarbler connected to the KX3. > > I had read that the KX3's CW-decoding could be displayed in WinWarbler. > > > But now, I have an issue and I'm not even out of the starting-gate. > > The Utility's tab "Firmware" shows that wheels are spinning in "Attempting to > connect KX3 on port COM3 at ...." using various bit/s speeds. > > The KX3 is set at 4800 bits/s. > > > So, I used Win10's trouble-shooting and got this message: > > The error I get is "Prolific USB-to-Serial Comm Port (COM8) has a driver > problem." > > > I'm mystified that I see COM3 in one place and COM8 in another. > > I have no idea what to do next. > > I was horrified to read that I had a Prolific USB adapter; so much bad press > about Prolific. > > TIA for any help. > > 73 Jerry KM3K > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
