Now that you mention it, that sounds right. I SHOULD have the key line
set up properly; I did at one time. Guess it's time to accept the pain
of pushing the radio desk out from the wall and seeing what's really
there. I might have accidentally screwed things up the last time I did
some station rewiring. Thanks for the reminder.
73...
Randy, W8FN
On 11/29/2018 8:48 PM, Don Wilhelm wrote:
Randy,
That indicates that you do not have your KAT500 and amplifier properly
connected.
The KEYOUT line from the transceiver should go first to the KAT500,
and then from the KAT500 to the amplifier.
When the KAT500 needs to tune, the amplifier will not be keyed and
tuning will take place at the power output of the transceiver.
After tuning, the amplifier will be engaged.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
