David,
That jack is used only for factory testing. Your P3 should work
normally without it.
Hang onto the jack and if you ever send the P3 to Elecraft for repair,
include it and the P3 will come back with it installed.
73,
Don W3FPR
On 1/2/2019 4:06 PM, David Olean wrote:
I went up to my remote ham shack to take out the ham gear for the
winter, and turn off the heat. I had a K3 with P3 panadaptor there for
my ten meter station, and when I started disconnecting things, I heard
something rattling around inside the P3. (?) When I got home and opened
it up I found an RJ-11 receptacle rolling around inside the box. The
whole assembly had fallen off the front panel PC board. I am not sure
how this would happen. The thing is surface mount soldered to the
board. I think this connector is only used for testing. I am not sure
what to do at this point. My hands are a bit shaky to try to fix it
myself. Or maybe I just leave it alone?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
