Page 25 of the PX3 manual says: The frequency span shown on the display in fixedtune mode is limited to ± 50 kHz (100 kHz total). If you enter fixed-tune mode with a wider span set, the span will be reduced automatically to ± 50 kHz.
:-) Fixed tune mode was a welcome addition a couple of years ago to the PX3. regards, Brian VE3IBW On Fri, Jan 11, 2019 at 10:31 AM Mark Wheeler via Elecraft < elecraft@mailman.qth.net> wrote: > Page 13 of the PX3 manual says the available span range is 2 kHz to 200 > kHz, but I am not able to set my span beyond 100 kHz. > > As an example, the top left of the PX3 display reads "3.700.000", > The middle (VFO A) frequency reads "3.747.000", and > The top right reads "3.800.000" > > Per the manual, I should be able to get a 200 kHz separation between the > top left and right frequencies, but I am unable to do so by changing the > span settings. > > Does anyone know what I may be doing wrong? > > 73, > Mark > WU6R > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to brian.waterwo...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
