Brian,
Thanks!
Mark
WU6R
On Jan 11, 2019, at 10:36 AM, Brian Waterworth <brian.waterwo...@gmail.com>
wrote:
Page 25 of the PX3 manual says:
The frequency span shown on the display in fixedtune mode is limited to ± 50
kHz (100 kHz total). If you enter fixed-tune mode with a wider span set, the
span will be reduced automatically to ± 50 kHz.
:-)
Fixed tune mode was a welcome addition a couple of years ago to the PX3.
regards,
Brian
VE3IBW
On Fri, Jan 11, 2019 at 10:31 AM Mark Wheeler via Elecraft
<elecraft@mailman.qth.net> wrote:
Page 13 of the PX3 manual says the available span range is 2 kHz to 200 kHz, but I am not able to set my span beyond 100 kHz.
As an example, the top left of the PX3 display reads "3.700.000",
The middle (VFO A) frequency reads "3.747.000", and
The top right reads "3.800.000"
Per the manual, I should be able to get a 200 kHz separation between the top
left and right frequencies, but I am unable to do so by changing the span
settings.
Does anyone know what I may be doing wrong?
73,
Mark
WU6R
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to brian.waterwo...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com