"Hope you check your windows setting, you might be surprised." No surprises here. I have never had my rig CODEC as the default sound playback device. I don't have Windows 10 but, in every earlier version I have used, it is easy to ensure that the rig CODEC is not the default playback device. Simply right click the speaker icon in the system tray and select playback devices. You will see a new "Sound" window with all playback devices listed. One will be shown as the default device. Ensure the default device is not your rig CODEC. This action does not require WSJT-X, or any other application, to be running since the selection of the default sound device is not application specific.
If, after you right click the speaker icon, you select volume mixer you should then see "Device" on the left side of the mixer window. Click the device menu and select the rig CODEC. You will see all the apps that are connected to that CODEC as long as they are running and have recently produced a sound output. The assignment of the rig CODEC to WSJT-X is done simply in the WSJT-X file/settings/audio menu. As with all digital mode applications, selection of the correct device is easier if the rig CODEC has been assigned a meaningful name. Mine is called "TS-590 RX" and "TS-590 TX". The name can be changed by speaker icon right click, playback devices, select the rig CODEC then properties, edit name in name field. Perhaps someone would confirm that all these steps are also applicable in Win 10. Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
