Since I have no had my hands on a DXE buffer amplifier, I have to guess.
Jack had a bandpass filter designed for the K2 at the output that peaked
the response at 4915 kHz.
I have the Z10000B-K2 buffer instructions on my computer. If DXE is
using the same board layout, then it should be easy for anyone to add
the filter from the instructions.
If you want a copy, send me an email off-reflector and I will send a
copy to you.
73,
Don W3FPR
On 2/15/2019 1:26 PM, Paul Gacek wrote:
Don
Do you know what has to be done (extra circuitry etc) to get the DXE Clifton
Lab amp to work with a K2 and essentially mirror the functionality of Jack
Smith’s one?
Paul Gacek
W6PNG/M0SNA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
