Ed,
Your basic set up is correct, DATA mode - AFSK. Do use line in/out.
However, there is no need to to switch into USB. FLDIGI will take care
of everything from here. I use VOX to turn on the transmitter vice
computer control and this just works FB. And yes, K3NDM will be in NAQP
this weekend.
73,
Barry
K3NDM
------ Original Message ------
From: "Ed G" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 2/23/2019 8:36:30 AM
Subject: [Elecraft] K3 and DATA Mode Transmit Question
My K3 seems to be all set up for RTTY – DATA Mode, AFSK A selected, I am using
Line in on the rear panel (selected in the MENU), I use MMTTY/N1MM, and I use a
microKeyer III. All appears well except that I need to switch the K3 into USB
mode to actually transmit RTTY. If I have the K3 set to DATA mode, the PTT is
working (K3 TX light comes on) but the K3 is not transmitting tones.
This must be something simple I am overlooking. Any ideas for what to check?
--Ed—
Sent from Mail for Windows 10
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
