> This must be something simple I am overlooking. Any ideas for what to
> check?
Did you select: MENU:MIC SEL = Line IN and set the Mic Gain
(Line In) level for four bars of ALC *AFTER* switching to AFSK A
(DATA)?
The K3/K3S Mic Gain control is overloaded (used for both mic
gain and Line In) and defaults to Mic Gain = 0 when initially
selecting data modes.
73,
... Joe, W4TV
------ Original Message ------
From: "Ed G" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 2/23/2019 8:36:30 AM
Subject: [Elecraft] K3 and DATA Mode Transmit Question
My K3 seems to be all set up for RTTY – DATA Mode, AFSK A selected, I
am using Line in on the rear panel (selected in the MENU), I use
MMTTY/N1MM, and I use a microKeyer III. All appears well except that
I need to switch the K3 into USB mode to actually transmit RTTY. If I
have the K3 set to DATA mode, the PTT is working (K3 TX light comes
on) but the K3 is not transmitting tones.
This must be something simple I am overlooking. Any ideas for what to
check?
--Ed—
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
