Yes that is the downside to it, so something to consider for those who may
want that option.
On Tuesday, March 12, 2019, 11:03:46 AM EDT, Don Wilhelm
<[email protected]> wrote:
Henry,
Nice solution, but it considers only a connection to a PC. If that is
all you want, that is fine.
The KIO2 AUX I/O connector also contains internal K2 signals that are
used for an externally mounted KPA100/KAT100 as well as the XVseries
transverters.
73,
Don W3FPR
On 3/12/2019 10:50 AM, Harry Yingst via Elecraft wrote:
> On my K2 I installed a USB Mini-B Female 5V DB9 interface in place of KIO2
> Part # DB9-USB-D5-F
> It's powered by the computer not the K2 so it draws no power from the K2
>
>
>
>
> On Tuesday, March 12, 2019, 10:10:05 AM EDT, Pawlak, Daniel L
><[email protected]> wrote:
>
> I just built the KIO2 and installed it with my KBT2 and KAT2 already in
>place. It was a tight fit, but did not restrict the module or the cable.
>Keeping it neat using cable ties is essential when you re-install the top
>cover so that they do not get pinched or lay on top of the RF board. The
>problem I did have was the cable from the KIO2 meeting at the AUX board. The
>KIO2 cable was too long and stiff which resulted in it trying to twist the
>board off the control board. Forming the KIO2 cable into an S-shape helped
>reduce some of the twisting.
>
> -----Original Message-----
> From: [email protected] <[email protected]> On
> Behalf Of Don Wilhelm
> Sent: Monday, March 11, 2019 9:09 PM
> To: Brian Denley <[email protected]>; [email protected]
> Subject: [EXTERNAL] Re: [Elecraft] ELECRAFT K2. Installing KBT2 with KIO2 in
> place
>
> Brian,
>
> No problem with the KAT2 installed. Ty-wrap the speaker cable to the
> KAT2 cable, but do not put any ty-wraps at the end of the battery.
> If the speaker wire has ty-wraps that fall at the end of the battery, cut
> them off.
>
> 73,
> Don W3FPR
>
> On 3/11/2019 9:00 PM, Brian Denley wrote:
>> I should also mention that the KAT2 is in the cover as well.
>>
>> Brian
>> KB1VBF
>> Sent from my iPad
>>
>>> On Mar 11, 2019, at 7:33 PM, Brian Denley <[email protected]> wrote:
>>>
>>> Is the KBT2 going to fit ok with the KIO2 in the cover as well? It seems
>>> like the battery is pinching the KIO2 coax cable pretty well.
>>>
> ______________________________________________________________
> Elecraft mailing list
> Home:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__mailman.qth.net_mailman_listinfo_elecraft&d=DwICAg&c=YC-d702opsuYKpiO2Bmlzg&r=kP1njbluGgLcMdyEofM_F-lOGeRxHPEzfZ061VLXuAc&m=m1-y2wL97Lh_G3W8j9ubuPpt6LEiFwJq68miCSC1Avk&s=Qx3kzzrxQZk-wRv8huwuwUJfXGlFqSEO_xuXJIsfqtU&e=
> Help:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__mailman.qth.net_mmfaq.htm&d=DwICAg&c=YC-d702opsuYKpiO2Bmlzg&r=kP1njbluGgLcMdyEofM_F-lOGeRxHPEzfZ061VLXuAc&m=m1-y2wL97Lh_G3W8j9ubuPpt6LEiFwJq68miCSC1Avk&s=ku3Kk3m-WgB6ypB2UZu3szZLk681ZVIZdHaQZqHAM4k&e=
> Post: mailto:[email protected]
>
> This list hosted by:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.qsl.net&d=DwICAg&c=YC-d702opsuYKpiO2Bmlzg&r=kP1njbluGgLcMdyEofM_F-lOGeRxHPEzfZ061VLXuAc&m=m1-y2wL97Lh_G3W8j9ubuPpt6LEiFwJq68miCSC1Avk&s=QDpYXG6HQpSUpGd3jNzNUUJkSvh5qN-OpJWwlp1Vclo&e=
> Please help support this email list:
> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.qsl.net_donate.html&d=DwICAg&c=YC-d702opsuYKpiO2Bmlzg&r=kP1njbluGgLcMdyEofM_F-lOGeRxHPEzfZ061VLXuAc&m=m1-y2wL97Lh_G3W8j9ubuPpt6LEiFwJq68miCSC1Avk&s=YSOCtXbL1HJtc5sOsp0PGevVXrx8nFWrDdo-1cuS_RY&e=
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
