Hi Peter,
It's probably a bad idea to have to antenna tuners in series. Each tuner
adds loss, and the one in the KPA1500 is integrated with the amplifier.
No question, one should by bypassed, and I'd be inclined to remove the
Palstar from the signal path -- that is, connect switched antennas
directly to the KPA1500 and find a new home for the Palstar.
Why? Well, several years ago when I stopped by their booth in Dayton and
looked inside the box, I saw really bad engineering -- the circuitry
relied on chassis return for switching. I asked to talk to the engineer
for the product, and the guy in the booth said he was. When I pointed
out the problem, he didn't understand why it was a problem! This is
engineering 101!
BTW -- the otherwise very good Ten Tec tuners are built that way too.
Trying to make a TDR sweep through them is impossible, and trying to get
6M through it would be a train wreck, and the Palstar that I looked
would be as bad!
73, Jim K9YC
On 3/12/2019 9:24 PM, Peter Dougherty wrote:
Palstar HF-Auto switches to AUTO mode rather than Manual to keep the match
seen by the KPA below 1.2:1
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
