I think instead I'll go the route of always leaving it in line, but that method would certainly work too! Thanks, Paul!
- pjd From: Paul Baldock <[email protected]> Sent: Tuesday, March 12, 2019 3:36 PM To: Peter Dougherty <[email protected]>; 'Reflector Elecraft' <[email protected]> Subject: Re: [Elecraft] KPA-1500 tuner questions At 07:49 PM 3/11/2019, Peter Dougherty wrote: The HF-Auto (external automatic tuner) is bypassed everywhere except the range of 3650 to 4000, and 7100 to 7300. I would like to automatically have the KPA1500's tuner go into bypass at the above ranges, One method (there are others) is to connect a dummy load to the KPA1500, and do a TUNE for each bin in those ranges. The tuner will then learn to go into BYPASS for those BINS. - Paul ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
