Good point. Done! What I have now is both tuners are ONLY in on the SSB portions of 40/80. Everywhere else the Palstar is electrically bypassed...but I can't remove it entirely for reasons stated in my previous posts.
- pjd -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Paul Baldock Sent: Wednesday, March 13, 2019 10:46 AM To: [email protected] Subject: Re: [Elecraft] KPA-1500 tuner questions At 03:01 AM 3/13/2019, you wrote: >The problem you will run into is if the antenna SWR changes above the >threshold for both the KPA1500 tuner and HF Auto bothtuners will >initiate a retune and the two will be fighting each other. I suggest you set KPA1500 "ATU HISWR RETUNE" to "OFF". The last thing you want is for the ATU to start tuning when you don't expect it, such as when you choose the wrong antenna by mistake. - Paul ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
