Bob,
Is the MIC SEL set to "FP.L bias"?
If bias is not applied, there will be no audio from that mic - it uses
an electret type element.
The default is bias OFF - because the bias could harm dynamic type
microphones.
73,
Don W3FPR
On 3/24/2019 10:46 AM, Bob Lightner wrote:
My High School club station, K4WTL, uses a K3 for CW. It works great!
Recently we tried to transmit on SSB. The radio doesn't seem to want to
transmit audio. The Elecraft hand mic is plugged into the front and the
menu confirms that. The Mode is correct and the firmware is up-to-date. We
have substituted microphones and nothing seems to solve the problem. Have
any of you had similar problems??? Bob/W4GJ, trustee for K4WTL.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
