Most likely problem is: the Elecraft mic (MH2 or MH4) is an electret mic and requires that a bias voltage be present on the audio pin. The MicSel should read “fPL bias”. If “bias” is not shown, press the “2” button on the panel to right if display to toggle the bias.
If MicSel shows fPH, press the “1” button to toggle H/L. Sent from my iPhone ...nr4c. bill > On Mar 24, 2019, at 10:46 AM, Bob Lightner <[email protected]> wrote: > > My High School club station, K4WTL, uses a K3 for CW. It works great! > Recently we tried to transmit on SSB. The radio doesn't seem to want to > transmit audio. The Elecraft hand mic is plugged into the front and the > menu confirms that. The Mode is correct and the firmware is up-to-date. We > have substituted microphones and nothing seems to solve the problem. Have > any of you had similar problems??? Bob/W4GJ, trustee for K4WTL. > > -- > > Astronomy compels the soul to look upwards and leads us from this > world to another. > > Plato, The Republic > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
