Don't hold me to this, but I believe there is a way to do it if you have Win4K3Suite. Win4K3Suite can read the menu settings from a K3. Not the gain and compensation values, but the menu items we would typically like to have in more than one radio like RX EQ, TX EQ, AGC SLP, AGC THR etc. Win4K3Suite allows you to save those settings to a file to be reloaded into the K3 later. Once you have saved the menu settings, I would think you could shut down Win4K3Suite, disconnect the USB cable from K3 number one and connect it to the second K3, bring Win4K3Suite back up and load that menu settings file to the second K3. Then save the configuration of the second K3. I do have Win4K3Suite. I have not tried this. But it would be interesting to try. I'm sure someone more knowledgeable than me will be able to shoot a hole in my theory. Tom, the author of Win4K3Suite probably can give us the answer off the top of his head.
Mark Musick, WB9CIF -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Walter Underwood Sent: Sunday, March 31, 2019 23:08 To: Elecraft mail list <[email protected]> Subject: Re: [Elecraft] Possibly dumb question... The config file includes compensation values for the devices in a specific radio. Loading it into a different radio would mean a serious realignment for that radio. This is a huge hole in the Elecraft utilities. It should be possible to save, load, and share the menu settings. I’ve lost count of the times someone has asked how to reset the rig to defaults and I’ve had to say “Sorry, can’t do it.” Even better, think about a checklist for which values you would save or load. Someone could share a file with TX EQ and compression settings, for example. Then separately, share AGC settings. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Mar 31, 2019, at 3:36 PM, Fred Jensen <[email protected]> wrote: > > Sadly, I think the configuration files are keyed to the radio's serial > number. I believe one reason for this is the modular nature of Elecraft > equipment, and attempting to load a config file that includes modules the > target radio does not would probably lead to problems and lots of posts on > this list. [:-) Dick, of Elecraft Utility fame may be able to expound more > concisely on the subject. > > 73, > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > On 3/31/2019 3:09 PM, Byron Servies wrote: >> You can use the K3 utility from Elecraft to save the configuration to >> a file and load it to the second radio. Perhaps that would do the trick. >> >> 73, Byron N6NUL >> >> On Sun, Mar 31, 2019 at 2:56 PM B. <[email protected]> wrote: >> >>> Hi Folks, >>> >>> >>> >>> I have been trying to find a way to "dump" or list out all the >>> settings in my K3s for the MENU options as well as the settings for >>> the CONFIG options without going through the front panel display and >>> writing them all down. >>> >>> >>> >>> The reason is to be able to make the same settings on another K3s, >>> again without having to sit and go through the settings one by one >>> and write them down. I did use the K3s utility to make a >>> configuration file and saved it but if I try to look at the file, I >>> get what looks like gibberish and it is not easily interpreted. >>> Maybe there is another program that can make the configuration file >>> readable? >>> >>> >>> >>> Am I missing an easy way to do this? Is there something I have not >>> found in the utility program that will do this? Is it possible to >>> list the settings at all, other than the front panel? >>> >>> >>> >>> Thanks for the help. >>> >>> 73, >>> >>> Bob >>> >>> AD7Z >>> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
