I was able to turn off logging software mode send so I can use Data A or I could use AFSK with rev. Also it’s possible to change K3 to USB AFSK. it’s not a K3 problem but I thought others might have the issue. Took me a few hours to sort out It all out. I might have more info tomorrow. I need to play with log software rig control config. Ray
Sent from my iPad > On Apr 2, 2019, at 20:16, Bill Frantz <[email protected]> wrote: > > Does using Reverse on the K3 make it easier to use the logging software spots? > > 73 Bill AE6JV > >> On 4/2/19 at 4:11 PM, [email protected] (Gmail) wrote: >> >> I recommend reading the FLDIGI manual. It states that USB is used for >> digital modes, including RTTY. The K3 uses USB for Data A and LSB for Data >> AFSK. >> In my first contest I was having problems getting reliable decoding and not >> many responses to my calls. I asked a friend who is an PVRC RTTY expert for >> help. He monitored my transmission and determined my signal was reversed. He >> said some operators would see that and change mode to answer me. Enabling Rv >> (reverse) on the lower FLDIGI control panel solved problem. However my >> logging software sends a mode command to radio when I select a spot and >> change frequency and it turns off Rv. A better solution is Data A mode which >> uses USB. >> There may be a way to change the FLDIGI RTTY default however I have not >> found it in the menus. Has anyone found it? >> Ray >> W8LYJ > --------------------------------------------------------------------------- > Bill Frantz | If you want total security, go to prison. There you're > 408-356-8506 | fed, clothed, given medical care and so on. The only > www.pwpconsult.com | thing lacking is freedom. - Dwight D. Eisenhower > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
