Hi Joel,
It sounds like you have phones plugged in somewhere. The traditional way
of wiring rigs is that plugging in phones mutes the speaker (usually
they're powered from the same output stage). The K3 has separate output
stages for spkr and cans, and the switching is done by logic. Most of us
who plug boom mic headsets into the rear panel assign SPKR + PHONES to
one of the PF keys -- I use PF2. SPKR+PHONES is a toggle, so it either
activates or de-activates muting of the speaker.
This is documented in the part of the manual that describes the menu
system.
73, Jim K9YC
On 4/2/2019 5:44 PM, Joel Hallas wrote:
I
was surprised to find I had no speaker audio with either internal or
external speaker(s). My first thought was that I had somehow fried the
speaker AF amp chip. But then I found that the speaker audio worked fine if
the CONFIG were set to SPKR + PH = yes. That would seem to rule out the
speaker amp as the problem.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html