Chuck,
I believe that is quite possible, but requires a more sophisticated
measurement of the transmission line parameters that the Forward power
and reverse power provided by a wattmeter.
Measure the parameters of the transmission line and calculate the
network needed to bring those parameters to a 50 ohm non-reactive load.
It took a great deal of time to do the math when I was in college, but
we did not have computers back in the early 1960s.
The principle is the same.
73,
Don W3FPR
On 4/8/2019 10:46 AM, Chuck MacCluer wrote:
Finding a tuner solution need not be an iterative process --- there is a
simple two-step approach if you measure the right parameter as you tune.
See QEX, Nov/Dec 2016, p. 3. Chuck MacCluer w8mqw
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
