Thanks Grant NQ5T, when I have finished this post I will proceed to go wipe off the egg on my face. I had gone thru all bands to be sure I had the correct antenna port selected but after Grants post I figured I had better check that again and found it to be incorrect. All is good now. What a bonehead move. Sri for using up the bandwidth. After 65 years on the air I should have known better. Anyways, thanks guys.
Jim W7OUU ----- Original Message ----- From: "Grant Youngman" <[email protected]> To: "elecraft" <[email protected]> Cc: "Jim Kennedy" <[email protected]> Sent: Sunday, April 28, 2019 6:04:30 PM Subject: Re: [Elecraft] No Pwr out 20M Sounds like you might have inadvertently changed the antenna selection — e.g., ANT 2 when your antenna is on ANT 1. Grant NQ5T K3 #2091 KX3 #8342 > On Apr 28, 2019, at 8:01 PM, Jim Kennedy <[email protected]> wrote: > > Hi all, I'm new to the list. Just turned on my K3 and noticed I have no power > out on 20 meters. I have performed all the normal trouble shooting stuff. The > transmitter is fine on all other bands and has normal 100w output on a Bird > 43 and Bird dummy load. It makes no difference if the rig is in bypass or > ATU. It flashes HI SWR. I also put it on one of my antennas on another band > and the tuner performed as it should. I suspect the ATU has gone wacky but > wanted to consult here just on the off chance I may have missed something. > Any input would be appreciated before I take a deep dive into the tuner. > Thanks in advance for any help. > > Jim > W7OUU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
