You mentioned issues with cracks in the MH3 mic. I haven't experienced that with my MH4, in fact with my recent order for a K4, I ordered an additional MH4 so I can have one with the K3s as well.
But as to repairing plastic cracks, depending on where they are, you might want to get some plastic epoxy and repair from the inside. Nothing will make the crack disappear but you'll stop the old ones from expanding. Do it from the inside will be the cleanest way. A couple days ago I picked up a plastic funnel where it has sat since last fall. I used the tab on its edge to pick it up, the funnel fell off, breaking at the tab. Plastic just won't ever last. 73, Gary KA1J > I'm now on my second MH3 mic for KX3 and discovered it too has several > cracks in the case. I returned my first one to Elecraft and received > this one at a reduced price. This time I asked about the proper > adhesive to hold it together. The answer: "As the hand microphones > are third party devices which we buy ourselves, I will pass the word > internally, . . . . . .Further, since we do not repair them, we do > not have a recommendation on glues etc. to use." I'm concerned this is > the answer for all third party components! > > Anyone have any ideas on a glue that will work. I've tried several. > Next step is rewire a $20 ebay speaker-mic. K5WTS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
