Juha,
Whenever I had a lightning hit KPA100 to repair, I always replaced all
the active devices (including all diodes) in the KPA100.
Even if the devices are not currently failing, there is a good chance
that they have been stressed and will fail later.
If you are using a USB to serial adapter, that was likely damaged too.
73,
Don W3FPR
On 7/1/2019 6:30 AM, Juha - oh6os wrote:
Hello,
Yes, all cables was connected during the first lightning bolt nearby.
Now K2/10W is ok! All work fine, luckily.
But with KPA100:
1) Metering (K2 LED paragraph) do not show anything.
2) I get 10W and 100W output, but can't adjustable power.
3) KPA100 don't talk with computer, yes computers COM port is broken too.
But I tested with another working COM and the same situation; don't work.
4) Pressing TUNE K2 show "0.1 9.9-1" (10W) and 1 1.0-1 (100W).
I replaced D16 and D17 on KPA100. Nothing changed.
juha oh6os
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
