That means the power is not shutting off. We bleed off the capacitor charge through the fan at front panel shutdown, which is why you hear the fan run for normally a short time. Turn off the KPA using the rear pane switch and call tech support in the morning. They need to look into this one.
73! Jack, W6FB > On Jul 14, 2019, at 11:22 AM, jerry <[email protected]> wrote: > > After yesterdays contest, I noticed this morning that the KPA500 fan was > still running at a high speed even though the amp had been turned off all > night by using the front "on" button. The only way the fan stops running is > if I turn the amp on with the front switch or if I shut the amp off by using > the rear on/off switch. Menu setting for Fan is set to normal. Any ideas? > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
